|
RR-CirKits, Inc.
Specializing in Affordable Electronics for Model Railroads |
| color
key |
LCC
(NMRA Layout Command & Control) |
||
| color key | SSB
(Simple Serial Bus) |
||
| color key | Logic
level I/O modules. Suitable for any 8 channel 10 pin I/O port. |
||
| color key | LocoNet
devices |
||
| Product ID | Description | Manual | Comments |
| 4ASD-4 |
Four Aspect Signal Driver - 4 head |
4asd-manual.pdf | |
| BOD-1 |
DC/DCC Occupancy Detector - 1 channel | BOD-1-manual-ss.pdf | |
| BOD-4-CP |
Detector/Driver - 4 channel | BOD-4-CP-manual.pdf | This board is
designed to augment the Signal-LCC to complete a Control Point. |
| BOD-8 |
CT coil Occupancy Detector - 8 channel | BOD-8-manual.pdf | |
| DCDB-8 |
Direct Current Driver Board - 8
channel |
DCDB-8-manual.pdf | |
| FOB-A |
Fan Out Board - 8 line with resistors |
fob-a-manual.pdf | |
| FOB-B |
Fan Out Board - 4 head signal demultiplex | fob-b-manual.pdf | This board is for use with the 4ASD-4
and LNCP only. (Digitrax SE8-c style cables) |
| FOB-C |
Fan Out Board - 16 line | fob-c-manual.pdf | |
| I/O
Tester |
Input - Output
Tester board |
||
| LB-II | LocoBuffer-II
Serial Interface |
LB-II
Rev-f.pdf |
LocoBuffer-II driver Download |
| LB-NG | LocoBuffer-NG |  LB-NG-b-quick-start.pdf |
LocoBuffer-Next Generation |
| LB-USB | LocoBuffer-USB LocoNet Interface | Old
LB-USB-manual.pdf LB-USB-manual-Rev-n and newer LB-USB-quick-start.pdf |
Schematics
LocoBuffer-USB drivers Driver Install Instructions for XP -- Windows 7 Driver Install instructions for Windows 8. Driver Install instructions for Windows 10. |
| LCC-LocoNet Gateway | LCC-LocoNet Gateway | LCC-LocoNet Gateway Manual Rev-a2 | Preliminary manual - new product. Some sections are incomplete. |
| LCC
Buffer-USB |
NMRA LCC to USB
Interface |
||
| LNCP | LocoNet Control Point | LNCP-manual-d.pdf | Work Sheets: Logic Sheet Signal Sheet |
| MotorMan |
8 Output Turnout Driver - SSB |
MotorMan-manual-a.pdf | |
| OIB-8 |
Opto Isolator - 8 Channel |
OIB-8-manual.pdf | |
| Power
Point |
LCC Bus Power
Injector |
||
| RB-4 |
SPDT relay - 4 Relays | RB-4-manual.pdf | |
| Repeater |
LCC Bit level
Repeater |
||
| SCSD-8 |
Single Coil Solenoid Driver - 8
Channel |
SCSD-8-manual.pdf | |
| SDB-4 |
Searchlight Driver Board - 4 channel
Bipolar |
sdb-4-manual.pdf | |
| Signal - LCC | 16 LED Driver plus 8 I/O for LCC Bus | Signal LCC-manual-c.pdf | April
2018 Draft version still Under Construction. |
| Signal - LCC-32H | 96 LED Driver plus 8 I/O for LCC Bus | SignalLCC-32H-manual-c.pdf |
Sept 2024 Draft version still Under Construction. |
| SignalMan-c/p | 16 Output Signal Driver - SSB | SignalMan-manual-d.pdf | |
| SMD-8 | Stall Motor Driver - 8 Channel | SMD-8-manual.pdf | |
| SSB-Gateway |
Simple Serial Bus - Stand Alone LocoNet | ||
| SwitchMan |
16 Channel LED
driver (or 8 dual coils) |
||
| TC-64 | 64 Line I/O - LocoNet |
TC-64-manual.pdf |
TC-64 Work Sheets: Basic
Sheet Initial Sheet The TC-64 is no longer manufactured. It has been replaced by the TowerController Mark II. |
| TC-Mark II | 64 Line I/O - LocoNet | TC
Mark-II
manual-d.pdf TowerController-Mark-II-CVs-Rev3.pdf |
|
| Terminator |
LCC Bus
Terminator |
||
| Tower
-
LCC |
16
Line I/O for LCC Bus |
Tower-LCC-manual-f.pdf | Last
Update August 2020 (for Firmware C5) Corrections for error messages. |
| Tower - LCC+Q |
16
Line I/O for LCC Bus |
Tower-LCC+Q-manual-d.pdf
|
Last Update July 2024 (for Firmware v1.10) |
| TowerMan |
16 Line I/O - SSB |
TowerMan-manual-b.pdf | Last Update November 2016 |
| WatchMan |
8 Block CT Coil Occupancy Detector -
SSB |
WatchMan-manual-a.pdf | |
